{"product_id":"ps2-xbox-360-joystick-assembly-replacement-thumbstick-3-pin","title":"PS2 \/ Xbox 360 Joystick Assembly - Replacement Thumbstick (3-Pin)","description":"\u003cp\u003eA DualShock 2 or Xbox 360 controller that drifts, walks the character on its own, or feels loose and will not snap back to center has a worn potentiometer module, not a bad rubber cap. This is a direct replacement 3-pin joystick assembly that fits both the PS2 DualShock 2 and the Xbox 360 controller. Same module, same solder footprint. It is the full unit: stick stem, housing and both potentiometers, ready to solder onto the board. This is the upgraded build with an OEM color-matched stem.\u003c\/p\u003e\n\n\u003ch3\u003eWhat this fixes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStick drift with nothing touching the controller\u003c\/li\u003e\n\u003cli\u003eDead zones or a stick that will not reach full range in one direction\u003c\/li\u003e\n\u003cli\u003eA loose, wobbly or gritty-feeling stick\u003c\/li\u003e\n\u003cli\u003eA snapped stem where the thumbstick cap broke off\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\n\u003cp\u003eSold as a \u003cstrong\u003esingle assembly\u003c\/strong\u003e, which replaces one stick. The 2 Pack does both sides on one controller.\u003c\/p\u003e\n\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePS2 DualShock 2 controller (SCPH-10010), all revisions\u003c\/li\u003e\n\u003cli\u003eXbox 360 wireless controller, all revisions\u003c\/li\u003e\n\u003cli\u003eXbox 360 wired controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes not fit\u003c\/h3\u003e\n\u003cp\u003ePS3, PS4, PS5, Xbox One and Xbox Series controllers use different modules with different pin layouts. We stock those separately.\u003c\/p\u003e\n\n\u003ch3\u003eHow to install\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eOpen the controller and lift the main board out.\u003c\/li\u003e\n\u003cli\u003eDesolder the old module. There are 14 solder points per stick, so a desoldering pump or wick makes this much easier.\u003c\/li\u003e\n\u003cli\u003eSeat the new assembly flush against the board and solder every pin.\u003c\/li\u003e\n\u003cli\u003eReassemble and test both axes before closing the shell fully.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eSoldering job, not a snap-in part. Plan on 20 to 30 minutes if you have done board work before.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eP83550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart type\u003c\/td\u003e\n\u003ctd\u003eAnalog joystick assembly (3-pin potentiometer, upgraded model)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eOEM color match\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003e1 piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall\u003c\/td\u003e\n\u003ctd\u003eSoldering required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this include the rubber thumbstick cap?\u003c\/strong\u003e No, this is the module only. Your original cap presses back onto the new stem. If the cap is worn too, add a set of Xbox 360 joystick covers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I install this without soldering?\u003c\/strong\u003e No. The module is soldered to the main board. A local repair shop can usually do the swap in under an hour with the part supplied.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the PS2 and Xbox 360 sticks really the same?\u003c\/strong\u003e Yes. Both controllers use the same 3-pin potentiometer module with the same footprint, which is why this one part covers both.\u003c\/p\u003e","brand":"Xyab","offers":[{"title":"Single Piece","offer_id":47666885099682,"sku":"P83550-1","price":5.99,"currency_code":"USD","in_stock":true},{"title":"2 Pack","offer_id":47666885132450,"sku":"P83550-2PK","price":9.99,"currency_code":"USD","in_stock":false},{"title":"10 Pack","offer_id":47666885165218,"sku":"P83550-10PK","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/9016\/9762\/files\/x360-yellow-model-1.png?v=1789486449","url":"https:\/\/94mershop.com\/products\/ps2-xbox-360-joystick-assembly-replacement-thumbstick-3-pin","provider":"94MER","version":"1.0","type":"link"}